Materials & Project Planning

How Much Paint Do I Need? Room Measurements, Coats, and Waste

Measure paintable wall area, subtract doors and windows, and use coats, coverage, and an extra allowance to work out how many gallons of paint to buy.

Measure the wall area you’ll actually paint, multiply it by the number of coats, and divide by the square feet your paint covers per gallon for one coat. Add any extra allowance before rounding to the containers you’ll buy. For example, a room with 423 square feet of paintable wall needs about 2.66 US gallons for two coats at 350 square feet per gallon with a 10% allowance. That’s three one-gallon cans if you buy only gallons. Use the coverage for your actual paint, not the example number.

Measure walls, not floor space

For a rectangular room with walls of the same height, add the lengths of all four walls and multiply by their height. If the room is 15 feet long and 11 feet wide, the perimeter is 52 feet. At 9 feet high, that’s 468 square feet of wall before deductions, even though the floor is only 165 square feet.

Measure the height of the surface you’ll paint. If the tape reads 8 feet 6 inches, enter 8.5 feet, not 8.6. For a stairwell, sloped ceiling, or room with a bump-out, sketch the walls one at a time. Split unusual shapes into rectangles and triangles, then add their areas. A triangular section is half its base times its height. Calculate those jobs from your measured total rather than forcing them into a rectangular-room calculator.

Subtract the surfaces you won’t paint

Measure each door and window opening across the wall area it replaces. If you’re leaving the casing unpainted or painting it a different color, measure to the outside edge of that casing. Multiply each opening’s width by its height and add the results. You can deduct a full-height cabinet the same way if you’re not painting behind it. Don’t deduct the same area twice.

There’s no need to fuss over every outlet. Measure the big exclusions, especially patio doors or a wall of windows, where guessing can make a real difference. If a door, its trim, or an accent wall gets a different paint, keep a separate estimate for it. Paint left over from the main walls won’t cover a shortage in a different color or sheen.

Choose the coat count and coverage for the job

Coverage is a rate for one coat. Two coats on 423 square feet means applying paint to the same area twice, not spreading one coat more thinly. Read the label or technical data sheet for the exact product and finish. For instance, BEHR lists 250–400 square feet per gallon for its PREMIUM PLUS Interior Flat, depending on application method and surface porosity; the rating excludes spray loss. Benjamin Moore lists 400–450 for Regal Select Interior Eggshell and recommends one or two coats for that product. Neither number applies to every paint.

Behr’s estimating guide notes that rough, textured, porous or previously unpainted surfaces, or a big color change, can require more paint. If the label gives a range and your wall is rough or porous, check the instructions and estimate toward the lower coverage end as a planning choice. A lower coverage number means more paint. If you’re still unsure whether one coat will hide the old color, follow the product’s directions and use a test patch before you commit to a quantity. Estimate any separate primer with its own coverage and coat count.

Add extra before rounding up

A small allowance can cover paint left in a tray or roller and give you some for touch-ups. The 10% below is an example, not a manufacturer rule. Pick the allowance based on your job and the application method. If you already lowered the coverage estimate to account for rough walls, don’t add a second buffer for that same factor by default.

Round only after calculating the amount you need, and compare that result with the container sizes sold for your product. If you’re just over two gallons, two gallons plus a quart may make more sense than three gallons, depending on price and availability. The calculator gives a whole-gallon estimate, not a comparison of container sizes.

Worked example: two coats in a 15-by-11-foot room

Suppose you’re painting all four walls one color. The walls are 9 feet high, with one 3-by-7-foot door opening and two 3-by-4-foot window openings. These are example measurements. Use two coats, an illustrative 350 square feet per gallon, and an illustrative 10% allowance.

Step Calculation Result
Gross wall area (15 + 11 + 15 + 11) × 9 468 sq ft
Door and window openings (3 × 7) + 2 × (3 × 4) 45 sq ft
Net wall area 468 − 45 423 sq ft
Area to cover across both coats 423 × 2 846 sq ft
Extra allowance 846 × 1.10 930.6 sq ft of coverage
Gallons before rounding 930.6 ÷ 350 About 2.66 gal
Purchase in whole gallons Round up 3 gal

A useful gut check: three gallons at this rate cover 1,050 square feet of application, enough for 930.6. But if you used a product or application rate of 300 instead, three gallons would cover only 900. The same job and allowance would then call for about 3.10 gallons, or four if buying whole gallons.

Before you buy

  • Use one estimate per paint. Don’t combine primer, ceiling paint, trim, or a different wall color with the main wall paint. For several rooms using the same product, add their unrounded gallon estimates before rounding to what you’ll buy.
  • Check that you subtracted openings only once. If you enter full room dimensions into the paint calculator, enter the total opening area, not a count of doors and windows. For the example, enter 15, 11, and 9 feet and 45 square feet of openings.
  • Read the two gallon results differently. The calculator is for a rectangular room with four equal-height walls. It shows net wall area and the unrounded paint estimate displayed to at most two decimals, then rounds the underlying amount up to whole gallons. An entered price per gallon gives a paint subtotal based on those whole gallons. It does not include primer, ceiling paint, trim, labor, equipment, supplies, or tax.

Sources & further reading

For general information and planning only. Examples are illustrative, and your costs will differ. Read our disclaimer.