Materials & Project Planning

Mulch Calculator

Estimate how much mulch one rectangular bed needs in cubic yards, cubic feet, and bags. Measure the bed in feet, then enter your added depth and the volume on the bag.

Make it yours

Your numbers

Start with the example below, then adjust it to your home.

ft

Measure one rectangular area you plan to cover.

ft
in

Enter the depth of new mulch to add. The 3-inch default is an example.

cu ft

Use the volume printed on the bag, not its weight.

Your numbers stay in your browser.
A clearer picture

Estimated mulch volume

1.85cu yd
Estimated volume
50 cu ft
Whole bags to buy
25 bags
Bed area
200 sq ft
Updates as you adjust your numbers

An estimate, not a quote. Example rates are adjustable. See the assumptions below.

Behind the numbers

How this calculator works

Bed area = length × width. Depth in feet = inches ÷ 12. Cubic feet = bed area × depth in feet. Cubic yards = cubic feet ÷ 27. Whole bags = cubic feet ÷ cubic feet per bag, rounded up before display rounding.

A worked example

A 20 × 10 ft bed has 200 sq ft of area. A 3-inch layer is ¼ ft deep, so the volume is 50 cu ft, or about 1.85 cu yd. At 2 cu ft per bag, buy 25 bags.

Assumptions & what’s included

  • One rectangular bed with a uniform depth of added mulch. The default bed, depth, and bag volume are adjustable examples, not recommendations.
  • Cubic yard and cubic foot displays round to at most two decimal places. A supplier may sell bulk mulch in different increments.
  • This is a geometric estimate. It does not automatically account for existing mulch, uneven ground, settling, compaction, delivery minimums, or application losses.

A few common questions

Why does the bag count round up?

Stores sell whole bags. If you need 25 cu ft and each bag holds 2 cu ft, 12 bags give you only 24 cu ft, so you need 13. The calculator uses the volume before display rounding.

What if mulch is already on the bed?

Measure the usable layer that will remain and enter only the additional depth you need. If the bed is uneven, measure sections separately and add their volumes before rounding to bags.