Decks & Fencing

Deck Board Calculator

Get a quick area-based board-purchase estimate before checking a cutting layout. Enter actual board dimensions and keep purchased spare stock separate from installed surface area.

Make it yours

Your numbers

Start with the example below, then adjust it to your home.

selection
ft
ft
selection
selection
selection
selection
selection
%

Applied to fractional area demand before rounding boards. It is not proof that stock lengths fit the layout.

Assumptions and overrides
$ / board

Illustrative board-only price. Update for your material, actual dimensions, grade, and stock length; material selection does not verify or silently change your quote.

selection
Your numbers stay in your browser.
A clearer picture

Area-based board estimate, including selected allowance

39stock boards
Actual installed deck surface
192 sq ft
Face area per stock board — no gap
5.5 sq ft
Fractional boards before allowance
34.91 boards
Fractional area demand after allowance
38.4 boards
Area estimate: purchased stock length
468 ft
Area estimate: illustrative purchased weight
1,076.4 lb
Area estimate: boards-only subtotal
$585.00
Alternative area-based screw allowance
672 screws
Example support lines across entered width at 16 in
10 lines
Updates as you adjust your numbers

An estimate, not a quote. Example rates are adjustable. See the assumptions below.

Estimate basis

The principal result is an area-based board estimate including the selected allowance, not a cut list or a guarantee against shortage. No gap coverage is subtracted. Purchased stock length includes spare boards; it is not installed linear footage.

Rectangle dimensions describe finished surface. Product gaps, stock lengths, cuts, and support geometry need a separate layout check.

Price is boards only: fasteners, framing, railing, stairs, footings, delivery, tax, and labor are excluded. Material changes do not verify the entered price or product weight; update both for the actual product. Reference lb/ft coefficients are examples, not loads certified safe for a deck.

The auxiliary screw count is an area allowance, not counted board/joist crossings. For a rectangle only, the support-line example distributes lines across the entered width at exactly 16 inches, including both boundaries. It is not a complete framing schedule; use Decking for an explicit board-run direction and optional row check.

Behind the numbers

How this calculator works

Area = L × W, or main rectangle plus a separately measured nonoverlapping extension, or entered known area. Board face area = actual width in inches / 12 × stock length in feet. Boards = ceil(area / face area × (1 + allowance/100)). Purchased linear feet = whole boards × stock length; boards-only subtotal = whole boards × entered board price. Weight = purchased linear feet × entered/example lb/ft. Screw allowance = ceil(area × 3.5 × 5.5 / actual width). Rectangle support example = ceil(width in feet × 12/16) + 1.

A worked example

For 16 × 12 ft, actual 5.5-inch width, 12-ft stock, 10% allowance and an illustrative $15/board: face area is 5.5 sq ft, raw demand 34.90909091 boards, purchase 39 boards, stock length 468 ft, and boards-only subtotal $585. At 2.3 lb/ft, purchased weight is 1,076.4 lb. The separate screw allowance is 672; support lines distributed across 12 ft at exact 16-inch spacing are 10. These are area-model quantities, not proof that every row fits stock.

Assumptions & what’s included

  • The source area model divides actual surface by actual board face area, applies its purchasing allowance once, then rounds stock boards up. It does not use joint-gap coverage or establish a feasible cutting layout. Example actual widths are 3.5/5.5/7.25 inches and stock lengths 8/10/12/16/20 ft; nominal lumber names do not verify actual dimensions.
  • L-shape uses main rectangle plus an explicitly nonoverlapping extension. Count the shared corner in the main rectangle only. Custom area and ambiguous L-shapes do not produce invented widths, joists, or row directions. Measure separate layouts where needed.
  • The $15/stock-board price and 10% allowance are editable examples, not current local quotes or a universal cutting allowance. Weight coefficients do not account for every profile, thickness or moisture condition. Board-only budgets exclude fasteners, framing, railing, footings, stairs, delivery, tax and labor.
  • Quantity calculations retain precision until display. Whole purchases round upward without subtracting an epsilon. Money uses the site's existing cents rounding (a positive half-cent such as 4274.055 displays 4274.06); intermediate quantities, labor and markup are not rounded to force totals. Displayed line items can differ by a cent from the rounded total. Original input measurements, not rounded result displays, should be used for manual transfers.
  • Example lb/ft coefficients: pressure-treated 2.3, cedar 1.7, composite 2.8, tropical hardwood 3.5. Override for the actual product. Weight is not a load-capacity assessment; lifespan, deck safety, structural capacity, gaps and product suitability are not established.

A few common questions

Does 39 boards prove I have enough to cut the deck?

No. Area coverage does not establish stock-length feasibility or offcut reuse. The Decking tool can check straight rectangular rows with one uninterrupted piece per row; joints, borders and other layouts need a separate plan.

Can I enter the two complete arms of an L-shaped deck?

Only if they do not overlap. Measure the main rectangle once and then only the extension outside it. Two complete overlapping arms count the shared corner twice.