Decking Calculator
Start with the same area-based board estimate, then check whether one stock board can supply each straight row. Keep installed rows, spare boards, support lines and alternative fastening methods distinct.
Your numbers
Start with the example below, then adjust it to your home.
Area-based board estimate, including selected allowance
- Actual installed deck surface
- 192 sq ft
- Face area per stock board — no gap
- 5.5 sq ft
- Fractional boards before allowance
- 34.91 boards
- Fractional area demand after allowance
- 38.4 boards
- Area estimate: purchased stock length
- 468 ft
- Area estimate: illustrative purchased weight
- 1,076.4 lb
- Area estimate: boards-only subtotal
- $585.00
- Area-based face-screw allowance — alternative
- 672 screws
- Area-based hidden-clip allowance — alternative
- 346 clips
- Board run along selected deck dimension
- 12 ft
- Distance across support centerlines
- 12 ft
- Modeled support lines including boundaries
- 10 lines
An estimate, not a quote. Example rates are adjustable. See the assumptions below.
Estimate basis
The principal result is an area-based board estimate including the selected allowance, not a cut list or a guarantee against shortage. No gap coverage is subtracted. Purchased stock length includes spare boards; it is not installed linear footage.
Rectangle dimensions describe finished surface. Product gaps, stock lengths, cuts, and support geometry need a separate layout check.
Price is boards only: fasteners, framing, railing, stairs, footings, delivery, tax, and labor are excluded. Material changes do not verify the entered price or product weight; update both for the actual product. Reference lb/ft coefficients are examples, not loads certified safe for a deck.
Area allowances for face screws and hidden clips are alternative estimates, not two complete systems to add together. They use installed area, not purchased spare-board area. The recovered clip allowance is ceil(area × 1.8 × 16/spacing × 5.5/actual width). Edge, starter, end and butt-joint attachments may be additional product-specific items.
Support lines are distributed across 12 ft along the board run using exact inch spacing; both boundary lines are included. Counts exclude extra blocking, doubled members, rims and a complete framing schedule.
Support spacing does not certify joist spans, beam or footing sizes, ledger attachments, guards, hot-tub capacity, or code compliance. Follow the exact decking and fastening system's current instructions.
How this calculator works
Area board purchasing uses ceil(area / actual board face area × (1 + area allowance/100)). Source fastener allowances: screws = ceil(area × 3.5 × 16/spacing × 5.5/width); clips use 1.8 instead of 3.5. For rectangular rows, R = max(1, ceil((perpendicular deck width in inches + gap)/(actual board width + gap))). Usable stock = stock length − total end trim. If a row fits, installed pieces = R and row purchase = ceil(R × (1 + separate spare allowance/100)), without offcut reuse. Support lines S = ceil(measured distribution feet × 12/spacing inches) + 1. Face screws = R × S × screws/crossing; generic interior clips = max(R−1,0) × S; separate edge attachments = 2 × S × entered attachments/edge/support.
The 192-sq-ft area example buys 39 boards and gives screw allowances 672/896/448 at 16/12/24 inches. The recovered default hidden-clip allowance is 346. With 12-ft uninterrupted rows across a 16-ft width, 5.5-inch boards, 1/8-inch gaps, 12-ft usable stock and 16-inch supports, the row check gives 35 installed rows, 10 support lines, 700 face screws or 340 interior clips, plus 20 separate edge attachments under the stated example. Ten percent separate spares buys 39 boards. A 10×10 deck instead needs 22 row pieces (25 with 10% spares), while the area estimate gives 19 (20 with 10% allowance). These are different purchasing methods, not totals to add together.
Assumptions & what’s included
- The source area model divides actual surface by actual board face area, applies its purchasing allowance once, then rounds stock boards up. It does not use joint-gap coverage or establish a feasible cutting layout. Example actual widths are 3.5/5.5/7.25 inches and stock lengths 8/10/12/16/20 ft; nominal lumber names do not verify actual dimensions.
- L-shape uses main rectangle plus an explicitly nonoverlapping extension. Count the shared corner in the main rectangle only. Custom area and ambiguous L-shapes do not produce invented widths, joists, or row directions. Measure separate layouts where needed.
- The $15/stock-board price and 10% allowance are editable examples, not current local quotes or a universal cutting allowance. Weight coefficients do not account for every profile, thickness or moisture condition. Board-only budgets exclude fasteners, framing, railing, footings, stairs, delivery, tax and labor.
- Quantity calculations retain precision until display. Whole purchases round upward without subtracting an epsilon. Money uses the site's existing cents rounding (a positive half-cent such as 4274.055 displays 4274.06); intermediate quantities, labor and markup are not rounded to force totals. Displayed line items can differ by a cent from the rounded total. Original input measurements, not rounded result displays, should be used for manual transfers.
- Decking example weight coefficients are 2.3/1.7/2.8/2.0 lb/ft for pressure-treated/cedar/composite/PVC. Optional rows use one uninterrupted piece per row and no inter-row offcut reuse. End trim reduces usable stock once; a separate spare allowance applies once to installed rows. A row longer than stock requires a supported joint/cutting plan; only the area estimate remains available.
- Rows include only inter-board gaps, not a perimeter gap. The last board may require ripping; the remaining width is not certified suitable for the product or fasteners. Support distance is parallel to straight board runs, perpendicular to joists, and may be independently entered only within that run. Boundary support lines are counted; extra framing, blocking, doubled members and rims are excluded.
- Face screws and hidden clips are alternative models. The generic clip model uses one clip per interior seam/support crossing; outer-edge attachments are separate. Product-specific starter, butt-joint and end details may differ. Purchased spares are not installed rows and never increase crossing counts.
- Trex's Enhance example distinguishes hidden clips from surface fastening and refers to current instructions for gapping and end details. It does not approve this calculator's generic gap or spacing for every board. This tool designs no beam, joist span, footing, ledger, guard or structural capacity.
A few common questions
Why can the row check need more boards than the area estimate?
An area estimate implicitly pools board face area. One uninterrupted piece per row may leave unusable offcuts. For a 10×10-ft deck with 12-ft stock, the no-spare row check needs 22 boards while area coverage gives 19. The row check makes that restricted cutting assumption explicit.
Are the 672 allowance screws and 700 crossing screws conflicting answers?
They describe different methods. The area allowance does not count crossings; the rectangular model counts 35 installed rows crossing 10 supports at two example screws each. Choose an appropriate product fastening method rather than adding both estimates.
