Driveways & Paving

Concrete Driveway Cost Calculator

Compare concrete installation-budget scenarios without treating thickness alone as a complete construction specification. Keep material allowances, ordinary labor, and combined project fees visible.

Make it yours

Your numbers

Start with the example below, then adjust it to your home.

selection
selection

Changes thickness, area material allowance, and fixed scope together. It is not a pavement design or thickness-only conversion.

selection

Bundled May 2025 BLS state/territory employee wages. No ZIP lookup, live request, or local material-price adjustment.

Assumptions and overrides
×

Illustrative wage-related cost multiplier.

%

Applied to materials, supplies, burdened labor, and fixed allowances. Not profit margin.

selection
Your numbers stay in your browser.
A clearer picture

Base concrete installation estimate

$5,571.46
Actual driveway area
400 sq ft
Selected scope thickness
5 in
25th-percentile wage scenario
$5,390.88
75th-percentile wage scenario
$5,665.92
Base cost per square foot
$13.93 / sq ft
Bundled scope material allowance
$2,000.00
Placement and ordinary finishing labor
16 person-hours
Base employee mean wage
$28.87 / hour
Base burdened labor
$692.88
Combined fixed project allowance
$1,950.00
Base subtotal before markup
$4,642.88
Base contractor markup
$928.58
Informational net uniform volume
6.17 cu yd
Informational net uniform volume
4.72 cu m
Updates as you adjust your numbers

An estimate, not a quote. Example rates are adjustable. See the assumptions below.

Estimate basis

Wage basis: United States; BLS OEWS May 2025, Cement Masons and Concrete Finishers (47-2051).

Wage data retrieved 2026-11-16; reference allowances observed 2026-11-17. Material prices, hours, fees, burden, and markup are editable illustrative planning assumptions, not surveyed current local prices.

Lower/base/higher vary employee wages and their markup only. Base uses the mean, not median; the other scenarios use occupational P25/P75. These are not confidence intervals or contractor-bid ranges.

Presets bundle thickness, material allowance, and fixed work scope; they do not certify vehicle capacity, subgrade suitability, reinforcement, or service life. The 750-sq-ft example is area only: a measured 20 × 38 ft rectangle is 760 sq ft.

Net uniform-slab volume is informational before any order allowance. Concrete, the selected reinforcement allowance, and finish materials are already grouped in the area rate; no ready-mix or rebar quantity charge is added again. Ordinary placement/finishing labor is separate from the combined specialty-service allowances.

Combined project fees are simplified allowances, not unlimited excavation, demolition, drainage, disposal, permit, delivery, access, or structural-work coverage. Review the actual site and every quote's scope. No hidden waste, crew multiplier, pump fee, or short-load charge is added.

Behind the numbers

How this calculator works

Materials = actual area × selected scope $/sq ft. Person-hours = area × hours/sq ft. Each labor scenario = person-hours × employee wage × burden. Subtotal = materials + burdened labor + combined fixed allowance. Markup = subtotal × markup percentage / 100. Total = subtotal + markup; cost per sq ft = total / area. Informational net volume = area × preset thickness in inches / 12 / 27 cu yd; it is not priced again.

A worked example

For 400 sq ft of mid-range scope, materials are $2,000 and labor is 16 person-hours. With manual May 2024 reference wages $21.79/$26.98/$30.73, 1.5 burden, $1,950 fixed allowance, and 20% markup, totals are $5,367.55 / $5,517.02 / $5,625.02. Base labor is $647.52; subtotal $4,597.52; unrounded total $5,517.024. The 5-inch net uniform slab volume is 6.17283951 cu yd. Current bundled default wages are from May 2025.

Assumptions & what’s included

  • Basic plain/mid-range with fiber/premium with rebar and stamping bundle 4/5/6-inch thicknesses, $3/$5/$8 per sq ft material allowances, and $1,200/$1,950/$2,850 combined fees. Labor is 0.04 person-hours/sq ft using Cement Masons and Concrete Finishers (SOC 47-2051). These are scope bundles, not thickness-only price conversions.
  • Area rates include concrete and the selected reinforcement/finish-material allowance. Ordinary placement/finishing labor is distinct from combined specialty-service allowances. Source fixed scope names excavation/grading, gravel base, forms, equipment, decorative finishing, and sealing; no unsupported itemized dollar allocation is asserted. Do not add the same ready-mix, reinforcement, or finishing service twice.
  • Fiber is not automatically a substitute for engineered steel. Stamping does not inherently require a thicker slab. This tool does not design reinforcement, guarantee crack prevention, or calculate rebar. Net uniform volume excludes thickened edges, footings, irregular sections, slopes, and order allowance; no pump or short-load fee is silently added.
  • Reference cost coefficients were observed November 17, 2026. They are illustrative allowances, not surveyed local prices. Default wages use bundled BLS OEWS May 2025 P25/mean/P75 employee hourly wages; the mean is not the median and can lie outside P25–P75. National fallback is disclosed when a selected area's occupation is missing or suppressed. Manual wages are unverified assumptions.
  • The geography selector changes employee wages only, not materials, productivity, climate, fees, or permits. No ZIP lookup or asynchronous estimate service is used. Employee wages exclude self-employed contractors and are not all-in billing rates; do not burden an already burdened contractor quote again.
  • Burden defaults to 1.5 times wages and markup to 20% of materials, burdened labor, and fixed fees. Markup is not margin. Fixed fees are charged once per project, not per square foot; person-hours are not multiplied by a second crew factor. Rounded component displays can differ by a cent from the rounded total.
  • The 750-sq-ft preset is an area example, not a 20 × 38 ft rectangle. Entering those dimensions produces 760 sq ft. Custom allowances remain as entered when the scope changes; confirm that each rate covers the newly selected work.
  • These bundles do not establish vehicle capacity, pavement life, structural suitability, or local compliance. Major excavation, demolition, drainage, disposal, permits, unusual access, delivery conditions, and structural work need project-specific assessment. A combined fee is not unlimited coverage of those services.
  • Full precision is retained until display. Currency rounds to cents, other quantities to at most two decimals, and whole purchases round upward from unrounded demand. Example prices and densities are editable assumptions, not verified current local quotes. No delivery minimum, tax, or hidden purchasing increment is added.

A few common questions

Can I order concrete from the net volume alone?

Confirm actual geometry, thickened areas, placement conditions, supplier increments, and a justified order allowance first. The informational net uniform volume is not an order quantity or an additional cost line.

Does the fiber scope replace a reinforcement design?

No. Fiber, steel layout, slab section, joints, and subgrade need project-specific specifications. The scope name is an illustrative pricing bundle, not an engineering recommendation.