Asphalt Driveway Cost Calculator
Build an installation budget from actual driveway area and a bundled thickness/work scope. Review the employee wage basis and replace illustrative allowances with project-specific inputs.
Your numbers
Start with the example below, then adjust it to your home.
Base asphalt installation estimate
- Actual driveway area
- 400 sq ft
- Selected scope thickness
- 3 in
- 25th-percentile wage scenario
- $2,921.11
- 75th-percentile wage scenario
- $3,140.35
- Base cost per square foot
- $7.65 / sq ft
- Bundled scope material allowance
- $1,000.00
- Placement and ordinary finishing labor
- 12 person-hours
- Base employee mean wage
- $25.02 / hour
- Base burdened labor
- $450.36
- Combined fixed project allowance
- $1,100.00
- Base subtotal before markup
- $2,550.36
- Base contractor markup
- $510.07
- Informational net uniform volume
- 3.7 cu yd
- Informational net uniform volume
- 2.83 cu m
- Informational net asphalt weight
- 7.33 US short tons
- Informational finished density
- 3,960 lb / cu yd
An estimate, not a quote. Example rates are adjustable. See the assumptions below.
Estimate basis
Wage basis: United States; BLS OEWS May 2025, Construction Laborers (47-2061).
Wage data retrieved 2026-11-16; reference allowances observed 2026-11-17. Material prices, hours, fees, burden, and markup are editable illustrative planning assumptions, not surveyed current local prices.
Lower/base/higher vary employee wages and their markup only. Base uses the mean, not median; the other scenarios use occupational P25/P75. These are not confidence intervals or contractor-bid ranges.
Presets bundle thickness, material allowance, and fixed work scope; they do not certify vehicle capacity, subgrade suitability, reinforcement, or service life. The 750-sq-ft example is area only: a measured 20 × 38 ft rectangle is 760 sq ft.
Net tonnage is informational at the stated density and thickness, with zero order allowance. The installation budget already prices material by area; tonnage is not priced again. Premium's sealcoat is included in its bundled allowance, not added as another charge.
Combined project fees are simplified allowances, not unlimited excavation, demolition, drainage, disposal, permit, delivery, access, or structural-work coverage. Review the actual site and every quote's scope. No hidden waste, crew multiplier, pump fee, or short-load charge is added.
How this calculator works
Materials = actual area × selected scope $/sq ft. Person-hours = area × hours/sq ft. Each labor scenario = person-hours × employee wage × burden. Subtotal = materials + burdened labor + combined fixed allowance. Markup = subtotal × markup percentage / 100. Total = subtotal + markup; cost per sq ft = total / area. Informational net volume = area × preset thickness in inches / 12 / 27 cu yd; it is not priced again.
With 400 sq ft of mid-range scope, the $2.50/sq-ft material allowance is $1,000 and 0.03 person-hours/sq-ft gives 12 hours. Manual reference wages $18.85/$23.31/$26.81, burden 1.5, fixed allowance $1,100, and markup 20% give $2,927.16 / $3,023.50 / $3,099.10. Base labor is $419.58; subtotal $2,519.58; unrounded total $3,023.496. These May 2024 wages are a historical fixture, not the bundled May 2025 default.
Assumptions & what’s included
- Basic/mid-range/premium bundle thicknesses 2/3/4 inches with material allowances $1.50/$2.50/$4.00 per sq ft and combined fixed fees $650/$1,100/$1,500. Premium includes a sealcoat allowance. All use 0.03 person-hours/sq ft. Changing scope changes these together; no arbitrary continuous thickness interpolation is offered.
- The source names sub-base delivery, mobilization, grading/excavation, and edge forming. Only combined fixed totals are confidently mapped; an itemized dollar allocation is not claimed. Informational tonnage uses a compatible finished density and zero purchasing allowance; no separate tonnage price is added to the area material charge.
- Reference cost coefficients were observed November 17, 2026. They are illustrative allowances, not surveyed local prices. Default wages use bundled BLS OEWS May 2025 P25/mean/P75 employee hourly wages; the mean is not the median and can lie outside P25–P75. National fallback is disclosed when a selected area's occupation is missing or suppressed. Manual wages are unverified assumptions.
- The geography selector changes employee wages only, not materials, productivity, climate, fees, or permits. No ZIP lookup or asynchronous estimate service is used. Employee wages exclude self-employed contractors and are not all-in billing rates; do not burden an already burdened contractor quote again.
- Burden defaults to 1.5 times wages and markup to 20% of materials, burdened labor, and fixed fees. Markup is not margin. Fixed fees are charged once per project, not per square foot; person-hours are not multiplied by a second crew factor. Rounded component displays can differ by a cent from the rounded total.
- The 750-sq-ft preset is an area example, not a 20 × 38 ft rectangle. Entering those dimensions produces 760 sq ft. Custom allowances remain as entered when the scope changes; confirm that each rate covers the newly selected work.
- These bundles do not establish vehicle capacity, pavement life, structural suitability, or local compliance. Major excavation, demolition, drainage, disposal, permits, unusual access, delivery conditions, and structural work need project-specific assessment. A combined fee is not unlimited coverage of those services.
- Full precision is retained until display. Currency rounds to cents, other quantities to at most two decimals, and whole purchases round upward from unrounded demand. Example prices and densities are editable assumptions, not verified current local quotes. No delivery minimum, tax, or hidden purchasing increment is added.
A few common questions
Does the premium thickness guarantee a stronger driveway?
No. This is a bundled budget scenario, not a mix design, load rating, base design, or service-life certification. A contractor must evaluate subgrade, drainage, traffic, and local requirements.
Does changing state make all costs local?
Only the employee wage scenarios change. Material, productivity, fixed allowances, burden, and markup remain your planning inputs. Compare written quotes for the same scope.
