Paver Calculator
Use actual paver dimensions and joint spacing to turn finished project area into whole-piece purchases. Estimate base gravel and bedding sand from the physical area, independently of paver cutting waste.
Your numbers
Start with the example below, then adjust it to your home.
Whole pavers to buy
- Finished area including joints
- 100 sq ft
- Effective module coverage per piece
- 0.23 sq ft / paver
- Pavers per square foot
- 4.3 pavers / sq ft
- Unrounded count before allowance
- 429.65 pavers
- Unrounded count including allowance
- 472.62 pavers
- Coverage of purchased whole pieces
- 110.09 sq ft
- Pavers-only subtotal
- $354.75
- Base gravel net volume
- 1.23 cu yd
- Base gravel estimated weight
- 1.67 US short tons
- Bedding sand net volume
- 0.31 cu yd
- Bedding sand estimated weight
- 0.42 US short tons
- Actual paver length
- 8 in
- Actual paver width
- 4 in
- Actual joint width
- 0.13 in
An estimate, not a quote. Example rates are adjustable. See the assumptions below.
Estimate basis
This repeating-cell area estimate uses actual stone dimensions plus one joint in each direction. The size presets are dimensional examples, not manufacturer-verified nominal sizes or an exact cutting layout.
Pavers-only subtotal excludes base gravel, bedding sand, polymeric joint sand, edging, delivery, tax, and labor. Paver cutting allowance changes pieces to buy, not the physical project area or underlying layer quantities.
Layer densities and depths are compatible-condition planning assumptions, not a pavement design or automatically a delivered loose tonnage. Zero depth excludes that layer. Bedding sand and polymeric joint sand are different scopes.
For the Polymeric Sand tool, transfer finished area, actual paver dimensions, and the actual joint width. Use the original input measurements, not rounded result displays or allowance-expanded purchasing coverage. Its separate default joint is 1/4 inch; this tool starts at 1/8 inch.
How this calculator works
Module coverage = (actual paver length + joint) × (actual paver width + joint) / 144 sq ft, using inches. Alternatively use manufacturer modular coverage directly, already including joints. Raw count = finished area / module coverage. Purchase = ceil(raw count × (1 + cutting allowance/100)); subtotal = whole pieces × price per piece. Each base or bedding layer: cu yd = area × depth in inches / 12 / 27; short tons = cu yd × compatible density / 2,000. Paver waste is not applied to layers.
For 100 sq ft, actual 8 × 4-inch pavers and 1/8-inch joints, each module covers 0.232747395833333 sq ft. At 10% allowance, demand is 472.615384615385 pieces, so buy 473. An illustrative $0.75 each gives $354.75. A 4-inch base and 1-inch bedding layer at the separate example density of 2,700 lb/cu yd need 1.66666667 and 0.41666667 short tons respectively.
Assumptions & what’s included
- Rectangle area is length × width; circle area uses the full π constant and the entered diameter, not radius. Known area replaces hidden dimensions. Measurements describe finished project area including applicable joints; purchasing allowance does not enlarge the installed project.
- Preset sizes are actual-dimension examples, not proof that a manufacturer's nominal 4×8 unit measures exactly that size. Coverage-per-piece mode already includes joints; do not add them again. This repeating-cell area model does not optimize border cuts, pattern fit, reusable offcuts, or exact layout.
- Default base/bedding depths are 4/1 inches, with separate 2,700 lb/cu yd density assumptions. Match depth and density to the same material condition; no universal compaction multiplier is supplied. Zero depth excludes that layer. Cutting waste does not increase base or bedding demand. Base extensions and delivery allowances are not modeled.
- The subtotal prices individual pavers only. It excludes gravel, bedding sand, joint sand, edging, delivery, tax, and labor. No pallet count or pallet discount is invented. Bedding sand and polymeric joint sand are separate materials.
- Full precision is retained until display. Currency rounds to cents, other quantities to at most two decimals, and whole purchases round upward from unrounded demand. Example prices and densities are editable assumptions, not verified current local quotes. No delivery minimum, tax, or hidden purchasing increment is added.
Data and allowance sources
A few common questions
Which area should I transfer to the joint-sand calculator?
Use finished project area, actual paver dimensions, and actual joint width. Do not use the waste-expanded purchase coverage. Paver starts with 1/8-inch joints, while Polymeric Sand starts with 1/4 inch; preserve your measured joint when transferring.
Will increasing paver waste order more gravel?
No. Paver waste changes whole-piece purchases only. Gravel and bedding use the physical project area and their own depth and density assumptions.
