Countertop Cost Calculator
Measure the actual countertop surface, then compare five material allowances using the same area and employee-wage basis. Fabrication and a standard edge are included in the illustrative material allowance.
Your numbers
Start with the example below, then adjust it to your home.
Base planning estimate
- Lower wage scenario
- $3,040.37
- Higher wage scenario
- $3,169.08
- Base installed cost
- $89.09 / sq ft
- Materials & fabrication
- $1,750.00
- Installation labor
- 5.25 person-hours
- Base employee wage
- $31.55 / hour
- Base burdened labor
- $248.46
- Fixed allowances total
- $600.00
- Base subtotal before markup
- $2,598.46
- Base contractor markup
- $519.69
An estimate, not a quote. Example rates are adjustable. See the assumptions below.
Estimate basis
Wage basis: United States, May 2025 BLS OEWS employee data. National estimates, not ZIP-level contractor quotes.
Data retrieved 2026-11-16; illustrative allowance assumptions observed 2026-11-16. Material, productivity, and fixed allowances are illustrative presets, not measured local prices. Edit them under Assumptions and overrides.
Lower/base/higher wage scenarios change labor and its markup only. The base uses mean wages, not median wages; lower/higher use weighted trade 25th/75th-percentile wages, not percentiles of project bids. These are not confidence bounds or a full range of contractor bids.
Compare countertop materials
All rows use your current surface area, wage basis, burden, markup, and allowance mode. These are labor-rate scenarios, not contractor bid ranges.
| Material | Lower wage | Base | Higher wage |
|---|---|---|---|
| Laminate | $1,286.92 | $1,338.77 | $1,372.72 |
| Butcher Block | $2,186.30 | $2,248.52 | $2,289.27 |
| Granite | $3,040.37 | $3,118.15 | $3,169.08 |
| Quartz | $3,460.37 | $3,538.15 | $3,589.08 |
| Marble | $4,944.45 | $5,037.78 | $5,098.90 |
How this calculator works
Materials = area × material allowance per sq ft. Person-hours = area × hours per sq ft. Labor = unrounded person-hours × employee hourly wage × burden multiplier. Subtotal = materials + labor + fixed allowances. Markup = subtotal × markup percentage ÷ 100. Total = subtotal + markup. Cost per square foot = unrounded total ÷ entered area. The three scenarios change only the wage input.
For 35 sq ft of Granite at manual illustrative wages of $21.77 / $27.30 / $31.75 per hour: material/fabrication is $1,750, labor is exactly 5.25 person-hours, and combined fixed allowances are $600. With 1.5× burden and 20% markup, totals display as $3,025.73 / $3,077.99 / $3,120.04. The base before rounding is $3,077.985.
Assumptions & what’s included
- Use countertop surface area, not room floor area. Material presets per sq ft / person-hours per sq ft / fixed allowances: Laminate $15 / 0.10 / $425; Butcher Block $35 / 0.12 / $450; Granite $50 / 0.15 / $600; Quartz $60 / 0.15 / $600; Marble $90 / 0.18 / $750.
- Material allowances already include fabrication and a standard edge. Installation labor is separate. Fixed allowances combine removal, plumbing disconnect/reconnect, sink cutout, and backsplash removal. An exact per-item bill is not provided. Check a supplier's included work before adding anything twice.
- The model uses carpenter employee wages for installation. Slab minimums, seams, unusual shapes, premium edges, difficult access, supports, and supplier-specific installation packages are not separately priced. No durability, lifespan, sealing schedule, or resale promise is modeled.
- Comparison rows use the same current area, wage basis, burden, and markup. With presets, each material has its own material/productivity/fixed coefficients. With custom allowances, those entered values apply to every row; identical estimates then reflect those shared assumptions.
- This is an area-based planning model. Materials, labor productivity, fixed allowances, 1.5× wage burden, and 20% markup are editable illustrative assumptions observed in a reference model on November 16, 2026, not government-prescribed costs or independently measured market prices.
- Wages are bundled BLS OEWS May 2025 employee hourly data, retrieved November 16, 2026. State estimates are not city or ZIP estimates. No live pricing API is used. If any required trade is missing or suppressed, the entire wage blend falls back to United States data and the result explicitly says so. Manual employee wages are available.
- Lower/base/higher scenarios vary only employee wages. Base uses weighted means, not medians; lower/higher use weighted occupational 25th/75th percentiles, not project-cost percentiles. A mean may lie outside those two percentiles. These scenarios do not capture all uncertainty or the spread of contractor bids.
- Burden is applied to wages; contractor markup is then applied to materials, burdened labor, and fixed allowances. Do not enter an all-in contractor billing rate as an employee wage without removing costs already included. Markup is not the same as profit margin.
- All measurements use square feet, person-hours, and US dollars. Calculation keeps full precision; display rounds money to cents and measured results to two decimals. Individually rounded lines may differ by a cent from their rounded sum.
- No sales tax, contingency, financing, temporary accommodation, or unlisted delivery fees are added. The listed permit and disposal allowances are planning entries, not statements of local rules or actual fees. Add excluded expenses separately to your project budget.
A few common questions
Does this give a local contractor quote?
No. The state selector uses May 2025 BLS employee wage estimates, not contractor billing rates or ZIP prices. Materials, productivity, fees, burden, and markup remain illustrative assumptions. Get written quotes for your exact scope and check exclusions.
Why is the base estimate different from mid-range finishes?
Mid-Range is a material-quality selection. The base estimate uses mean employee wages (or your manual base wage). It is not the median bid or a middle finish package, and it need not fall between the other two wage scenarios.
Why are the comparison rows sometimes identical?
Custom allowances apply the same entered material, labor-productivity, and fixed amounts to every material row. Switch back to illustrative presets for material-specific comparisons. Area, wage basis, burden, and markup always stay the same across rows.
Are tax and contingency included?
No. Neither is silently added. Build a separate allowance for excluded tax, uncertainty, and project-specific expenses, and check whether your supplier or contractor already includes them.
