Shingle Calculator
Translate a simple roof or known surface area into product-specific field bundles. Keep caps, starter, underlayment, and nail assumptions separate so a field-shingle subtotal is not mistaken for a complete roof budget.
Your numbers
Start with the example below, then adjust it to your home.
Field-shingle purchase
- Actual roof surface
- 1,502.64 sq ft
- Actual roofing squares
- 15.03 100 sq ft
- Field purchasing area
- 1,728.03 sq ft
- Field purchasing squares
- 17.28 100 sq ft
- Field-shingle-only subtotal
- $2,080.00
- Coverage of whole field bundles purchased
- 1,733.33 sq ft
- Main ridge length
- 42 ft
- Ridge plus hip cap length
- 42 ft
- Dedicated cap packages
- 2 packages
- Separate underlayment area
- 1,502.64 sq ft
- Underlayment rolls
- 4 rolls
- Raw illustrative nail weight
- 43.2 lb
- Whole-pound nail purchase
- 44 lb
- Field-shingle purchasing weight
- 4,752.09 lb
- Field-shingle purchasing weight
- 2.38 US short tons
An estimate, not a quote. Example rates are adjustable. See the assumptions below.
Estimate basis
The field-shingle subtotal excludes cap, starter, underlayment, and nail costs even when their quantities are shown. Choose the combined scope and enter every included price to total those materials.
Field-shingle weight uses purchasing area × illustrative weight per square. It is not the actual rounded package shipment weight or an installed structural-load check.
Starter and dedicated caps are separate products, not assumed to be included in field-shingle waste. Underlayment has its own layer count, effective coverage, and allowance. Nail weight is a planning assumption, not a fastening specification.
How this calculator works
Actual and field purchasing area use the roofing geometry formula. Field bundles = ceil(purchasing area × nominal bundles per square / 100), or ceil(purchasing area / entered effective bundle coverage). For equal-pitch hips, a = max(Le, We), b = min(Le, We), main ridge = a − b, each hip = (b/2) × sqrt(2 + (pitch/12)²); cap length = main ridge + four hips. Gable cap length = Le. Cap packages = ceil(cap length × (1 + cap allowance/100) / effective cap coverage). Starter packages = ceil(measured starter length / effective package coverage). Nail pounds = purchasing squares × entered lb/square, then ceil for whole-pound purchase. Field subtotal = bundles × field-bundle price.
For the 40 × 30 ft, 1-ft overhang, 6/12 gable at 15% allowance, 52 architectural field bundles at $40 cost $2,080 before accessories. A 42-ft ridge needs two example 25-ft cap packages; underlayment needs four 400-sq-ft rolls. At 2.5 lb per purchasing square, nails are 43.20083333 lb, or 44 whole pounds. Area-based field weight at 275 lb/square is 4,752.09166578 lb. Switching the same roof to equal-pitch hip gives a 10-ft main ridge, four 24-ft hips, 106-ft total cap length, and five cap packages. Nominal four/five bundles per square instead need 70/87 field bundles.
Assumptions & what’s included
- Simple rectangular, uniform-pitch roofs only. Length and width are outside-wall dimensions. Horizontal overhang is added on all four sides, including gable ends. Gable ridge follows entered length even when width is larger. Equal-pitch hip geometry normalizes the longer and shorter expanded dimensions. Shed mode slopes across entered width; flat mode ignores pitch.
- Known actual sloped area includes measured slope and overhang; hidden dimensions and pitch are inactive. Area alone cannot establish perimeter, ridge, hips, starter, or gutter runs. For dormers, valleys, mixed pitches, intersecting roofs, or nonrectangular plans, use separately measured nonoverlapping surfaces and independent accessory measurements. Do not climb onto a roof to obtain inputs; use reliable drawings or qualified measurement.
- A roofing square is 100 sq ft, not a bundle. Actual area excludes purchasing allowance. Package counts use full-precision demand and round upward without subtracting an epsilon. Exact decimal comparisons and squared geometry avoid rounding pitch factors before purchase decisions. Changing display units preserves the physical measurement.
- The 15% field allowance is an editable example, not a roof-specific recommendation. Field bundles, dedicated caps, starter, and underlayment are separate scopes. Effective product coverage must already include applicable laps; do not count the same lap or waste twice.
- Underlayment starts with actual roof surface, not field purchasing area. Example coverage is 400 sq ft per roll with one layer and zero additional allowance. Verify the selected product and assembly. No universal minimum slope, underlayment layer count, fastening pattern, or product suitability is certified.
- Money is displayed to cents, quantities to at most two decimals, and package counts as whole purchases. Full precision is retained before display. Prices and weights are illustrative editable inputs, not verified current local quotes or structural engineering advice.
- Field-shingle type selects illustrative bundle prices of $30/$40/$55 and area weights of 200/275/350 lb per square for 3-tab/architectural/premium. It does not establish coverage: choose nominal bundles per square or actual effective wrapper coverage separately. Three bundles per square is exact 100/3-sq-ft coverage; a typed 33.33-sq-ft coverage remains 33.33.
- Gable ridge follows entered expanded length. A square equal-pitch hip roof has zero main ridge but four nonzero hips; no slope factor is applied twice to those 3D lengths. Known area requires independent cap measurements or an explicit exclusion. Dedicated cap coverage defaults to an illustrative 25 ft/package and zero separate allowance.
- Starter defaults to excluded. Including it requires measured length and actual effective coverage; no starter quantities are hidden inside field waste. Nail weight defaults to an illustrative 2.5 lb per purchasing square. Verify actual fastening instructions; whole-pound rounding is not a product package-size claim.
- Field-only subtotal is not a complete roofing-material estimate. Combined scope requires explicit prices for every included accessory and known cap scope. Zero prices are allowed only when entered. Weight may instead use actual field-bundle weight times rounded bundles; accessories are excluded in both weight modes. Neither mode certifies a roof's load capacity.
A few common questions
Why do premium shingles still ask for bundle coverage?
Shingle type alone does not identify a product. Some specialty products require four or five bundles per square, while other products differ. Confirm the wrapper and enter its coverage; the type selector changes only illustrative price and weight.
Are ridge caps and starter included in the field-shingle subtotal?
No. Their quantities and prices are separate. Select the combined budget and enter all included accessory prices to total them; otherwise the displayed field subtotal covers field shingles only.
