Roofing Cost Calculator
Start with actual sloped roof area, then compare transparent material and labor allowances. Use measured area from the roofing quantity tool when a simple rectangular roof model fits your project.
Your numbers
Start with the example below, then adjust it to your home.
Base roof replacement estimate
- Actual sloped roof area
- 2,000 sq ft
- Actual roofing squares
- 20 100 sq ft
- Lower wage scenario
- $8,962.56
- Higher wage scenario
- $10,287.36
- Base cost per measured unit
- $4.89 / sq ft
- Roof covering and basic accessory materials
- $3,400.00
- Installation labor
- 80 person-hours
- Base employee wage
- $27.95 / hour
- Base burdened labor
- $3,354.00
- Combined fixed project allowances
- $1,400.00
- Base subtotal subject to markup
- $8,154.00
- Base contractor markup
- $1,630.80
An estimate, not a quote. Example rates are adjustable. See the assumptions below.
Estimate basis
Wage basis: United States; BLS OEWS May 2025, Roofers (47-2181).
Wage data retrieved 2026-11-16; reference allowances observed 2026-11-16. Material prices, hours, fees, burden, and markup are editable illustrative planning assumptions, not surveyed current local prices.
Lower/base/higher vary employee wages and their markup only. Base uses the mean, not median; the other scenarios use occupational P25/P75. These are not confidence intervals or contractor-bid ranges.
Comparison uses each material's preset at the selected Basic, Mid-range, or Premium allowance tier. These are generic budgeting tiers, not interchangeable product specifications.
Compare roof coverings
Every row uses the same actual area, tier, employee wage basis, burden, markup, and allowance mode. Custom rates apply to every row; these are wage scenarios, not contractor bids.
| Material | Lower wage | Base | Higher wage |
|---|---|---|---|
| Asphalt shingles | $8,962.56 | $9,784.80 | $10,287.36 |
| Metal | $21,123.84 | $22,357.20 | $23,111.04 |
| Tile | $28,005.12 | $29,649.60 | $30,654.72 |
| Flat / TPO | $17,323.20 | $18,351.00 | $18,979.20 |
How this calculator works
Materials = actual sloped area × selected material $/sq ft. Labor hours = actual area × hours/sq ft. Each labor scenario = hours × employee wage × burden. Total = (materials + burdened labor + combined fixed allowance) × (1 + markup/100). Cost per sq ft = total / actual area; squares = actual area / 100. No extra pitch or waste factor.
For 2,000 sq ft of mid-range asphalt with manual employee wages $21.18/$25.99/$29.44, material allowance is $3,400, labor is 80 person-hours, and combined fixed costs are $1,400. At 1.5 burden and 20% markup, totals are $8,809.92 / $9,502.56 / $9,999.36. Base labor is $3,118.80, subtotal $7,918.80, and markup $1,583.76. These reference wages are a manual May 2024 fixture, not the current bundled May 2025 default.
Assumptions & what’s included
- Preset material $/sq ft by Basic/Mid-range/Premium: asphalt 1.50/1.70/4.00; metal 3.50/6.00/10.00; tile 5.00/8.00/12.00; flat/TPO 3.00/5.00/7.00. They include basic covering, underlayment, fasteners, and ridge-cap allowances. Generic tiers avoid calling metal or membrane an architectural shingle.
- Labor hours per sq ft: asphalt 0.04, metal 0.06, tile 0.08, flat/TPO 0.05. Combined fixed allowances: $1,400/$1,600/$2,000/$1,100 respectively. Reference prose includes tear-off/disposal, dumpster, permits, flashing/vents/drip edge, and ice/water shield. Only combined totals are authoritatively mapped in the client model; an itemized dollar allocation is not asserted. Review disposal/dumpster scope and do not charge the same service twice. These simplified project allowances are not size-scaled demolition estimates and do not cover unlimited existing layers, deck replacement, or structural reinforcement.
- This cost model does not establish roof-covering suitability, minimum slope, structural capacity, flashing design, ventilation, or drainage. No automatic waste is added to an already supplied actual area.
- Reference coefficients are illustrative planning allowances observed November 16, 2026, not verified current local market prices. Wage geography changes employee wages only; it does not localize materials, productivity, permits, climate, or tax. No ZIP, climate, PPI, or remote estimate API is called.
- Bundled BLS OEWS May 2025 data are employee hourly wages, not contractor billing rates. Lower/base/higher use P25/mean/P75. The mean can fall outside P25–P75 and is not reordered. Missing or suppressed occupation data trigger a disclosed complete national fallback. Manual wages remain unverified assumptions.
- Labor burden defaults to 1.5 times wages and contractor markup to 20% of the modeled subtotal. Both are editable assumptions. Markup is not margin; fees are charged once per project. Full precision is retained until display, so rounded line items can differ by a cent from a rounded total. Tax, financing, delivery, structural repairs, hazardous-material work, and unusual access are excluded unless expressly included in your entered allowances.
A few common questions
Should I enter house footprint or roof surface area?
Use actual sloped roof surface area including measured overhang. The roofing quantity calculator can derive it for a simple uniform-pitch roof. This cost tool does not apply pitch again.
Does selecting a state provide a local roofing quote?
No. It selects bundled employee wage statistics. Material, productivity, fixed-fee, burden, and markup assumptions remain visible planning inputs; obtain project-specific quotes.
