Siding Calculator
Measure a rectangular house or one wall, then deduct openings before adding a purchasing allowance. Keep installed wall area, siding squares, and whole packages distinct.
Your numbers
Start with the example below, then adjust it to your home.
Required siding area
- Gross wall and gable area
- 1,260 sq ft
- Included gable area
- 0 sq ft
- Opening deductions
- 162 sq ft
- Net installed area
- 1,098 sq ft
- Purchasing area with allowance
- 1,207.8 sq ft
- Unrounded-area material budget
- $1,328.58
- Illustrative purchasing weight
- 724.68 lb
An estimate, not a quote. Example rates are adjustable. See the assumptions below.
How this calculator works
House gross area (sq ft) = 2 × (length + width) × wall height + width × gable height, for two matching width-end gables. Single-wall gross = wall length × wall height + 0.5 × wall length × gable height. Net = gross − openings. Purchasing area = net × (1 + waste percent / 100). Squares = purchasing area / 100. Material budget = unrounded squares × dollars per square. Optional packages = ceil(purchasing area / effective package coverage).
A 40 × 30 ft house with 9-ft walls, no gables, two 21-sq-ft doors, and eight 15-sq-ft windows has 1,260 sq ft gross, 162 sq ft openings, and 1,098 sq ft net. Ten percent extra gives 1,207.8 sq ft or 12.078 squares. At illustrative $110 and 60 lb per square: $1,328.58 and 724.68 lb. Two 6-ft gables add 180 sq ft, giving 14.058 purchasing squares.
Assumptions & what’s included
- Wall height excludes gables. House mode assumes two matching gables on the width ends. Measured opening area replaces preset doors/windows; it is never added to them. Equal openings and gross area give zero demand; larger openings are invalid.
- Illustrative dollars / pounds per square: Vinyl 110 / 60, Fiber Cement 190 / 250, Wood Lap 300 / 150, Engineered Wood 200 / 175, Aluminum 250 / 45. Replace with actual product data. A square is 100 sq ft, not a whole package. The package budget applies the entered per-square rate to package-rounded coverage, not a supplier's quoted package price.
- Use effective installed coverage including overlap. Deductions and extra material are an estimating method, not optimized cutting. This material-only budget excludes labor, trim, flashing, delivery, and other installation expenses. Transfer net area, not purchasing area, to the separate installation-cost tool.
- Dimensions are normalized to feet and square feet; changing display units preserves the physical measurement. Inputs have explicit finite limits. Missing active inputs are errors, while an explicitly entered zero price is valid.
- Full precision is retained until display. Money displays to cents using half-up rounding for these nonnegative costs; individually rounded lines may differ by a cent from their sum. Discrete purchases round upward before display, without subtracting an epsilon. Siding squares remain an area measure.
- Defaults and reference price, weight, productivity, burden, markup, and fee allowances are adjustable examples observed November 16, 2026, not verified current supplier prices or universal recommendations. Confirm product labels, scope, and written quotes before ordering.
Data and allowance sources
A few common questions
Should I round siding squares to whole numbers?
Not automatically. Squares express area. Round only the actual product packages using their effective coverage, and compare the package budget separately.
Does this include installation?
No. Use the Siding Installation Cost Calculator with the net installed area shown here. Do not add purchasing waste to labor or fixed fees automatically.
