Windows, Siding & Insulation

Siding Installation Cost Calculator

Use net wall area after openings and before purchasing waste. Compare material and finish allowances while keeping supplies, installation labor, and project fees visible.

Make it yours

Your numbers

Start with the example below, then adjust it to your home.

sq ft

After openings, before purchasing waste. No extra waste is added in this cost model.

selection
selection
selection
selection

Bundled May 2025 BLS state/territory employee wages. No ZIP lookup, live request, or local material-price adjustment.

Assumptions and overrides
×

Illustrative wage-related cost multiplier.

%

Applied to materials, supplies, burdened labor, and fixed allowances. Not profit margin.

selection
Your numbers stay in your browser.
A clearer picture

Base planning estimate

$11,357.40
Net installed wall area
1,500 sq ft
Lower wage scenario
$10,468.56
Higher wage scenario
$11,939.52
Base cost per unit
$7.57 / sq ft
Materials
$4,500.00
Supplies allowance
$1,125.00
Installation labor
60 person-hours
Base employee wage
$31.55 / hour
Base burdened labor
$2,839.50
Fixed allowances total
$1,000.00
Base subtotal before markup
$9,464.50
Base contractor markup
$1,892.90
Updates as you adjust your numbers

An estimate, not a quote. Example rates are adjustable. See the assumptions below.

Estimate basis

Wage basis: United States; BLS OEWS May 2025, Carpenters (47-2031).

Wage data retrieved 2026-11-16; reference allowances observed 2026-11-16. Material prices, hours, fees, burden, and markup are editable illustrative planning assumptions, not surveyed current local prices.

Lower/base/higher vary employee wages and their markup only. Base uses the mean, not median; the other scenarios use occupational P25/P75. These are not confidence intervals or contractor-bid ranges.

Behind the numbers

How this calculator works

Materials = net sq ft × material dollars per sq ft. Supplies = net sq ft × supplies rate. Person-hours = net sq ft × hours per sq ft. Labor = person-hours × carpenter employee wage × burden. Total = (materials + supplies + labor + fixed allowances) × (1 + markup percent / 100). Per-sq-ft cost = unrounded total / net installed area. No additional purchasing waste is applied.

A worked example

1,500 net sq ft of Mid-Range Vinyl uses $4,500 materials, $1,125 supplies, 60 person-hours, and $1,000 fixed allowances. At manual reference wages $21.77 / $27.30 / $31.75, 1.5× burden, and 20% markup, totals are $10,301.16 / $10,898.40 / $11,379.00. Bundled BLS wages are identified separately.

Assumptions & what’s included

  • Basic / Mid-Range / Premium materials per sq ft: Vinyl $1.10 / $3 / $5; Wood Lap $3 / $5.50 / $8; Fiber Cement $1.90 / $5.50 / $8.50; Aluminum $2.50 / $4 / $6.50. Supplies by quality: $0.50 / $0.75 / $1. Person-hours per sq ft: Vinyl 0.04, Wood Lap 0.06, Fiber Cement 0.06, Aluminum 0.05.
  • Fixed allowance by quality: $600 / $1,000 / $1,500, combining modeled scaffolding, removal, permits, and hauling. The reference did not establish an authoritative per-item allocation. These small pooled amounts do not cover every demolition/access scope or hazardous-material removal.
  • Enter net installed area from the Siding Calculator. Materials are a separate cost-model allowance, not a supplier bill for the quantity tool's packages. No extra waste, geometry, or opening deduction is silently applied here.
  • Wages are employee hourly data from BLS OEWS May 2025, retrieved November 16, 2026. State/territory selections are not ZIP or city estimates and do not change material prices. Missing or suppressed occupation data falls back to the entire national wage series with an explicit notice. Manual employee wages remain available.
  • Lower/base/higher vary only wages: occupational P25, mean, and P75. The mean is not a median and may fall outside the percentiles; scenarios are neither confidence intervals nor the full range of bids. Burden multiplies employee wages; markup then applies to the subtotal. Do not enter an all-in contractor rate as a wage.
  • No tax, contingency, financing, or unlisted delivery is added. Fixed allowances are editable budgets, not local permit requirements or estimates for hazardous-material work. Project quantity must be positive, even if fixed fees have been entered.
  • Dimensions are normalized to feet and square feet; changing display units preserves the physical measurement. Inputs have explicit finite limits. Missing active inputs are errors, while an explicitly entered zero price is valid.
  • Full precision is retained until display. Money displays to cents using half-up rounding for these nonnegative costs; individually rounded lines may differ by a cent from their sum. Discrete purchases round upward before display, without subtracting an epsilon. Siding squares remain an area measure.
  • Defaults and reference price, weight, productivity, burden, markup, and fee allowances are adjustable examples observed November 16, 2026, not verified current supplier prices or universal recommendations. Confirm product labels, scope, and written quotes before ordering.

A few common questions

Which area should I transfer from the quantity tool?

Use net installed square feet after opening deductions. Do not use waste-adjusted purchasing area or rounded squares for all cost components.

Are permit and removal costs verified for my location?

No. Fixed totals are illustrative combined allowances. Obtain actual scope and local requirements, then use Custom allowances to replace them.